TRION(3) MULTI Modules
Synchronous analog signal acquisition from any sensor
Simply plug in our TRION(3)-MULTI universal analog amplifiers into your data acquisition system and directly connect bridge, voltage, current, IEPE, resistance, potentiometer, RTD, counter and CAN as well as charge, temperature and LVDT via MSI adapter. Experience full flexibility and high channel density
TRION(3)-MULTI MODULES OVERVIEW
 |
CHANNEL | SAMPLE RATE/CH. | RESOLUTION | ISOLATION | CONNECTOR TYPES | ||
TRION3-1850-MULTI |
         |
Datasheet | 4 or 8 | 5 MS/s | 24-bit >2 MS/s: 18-bit | yes | 4 D-SUB or 8 LEMO 0B |
TRION3-1820-MULTI |
|
Datasheet | 4 or 8 | 2 MS/s | 24-bit >2 MS/s: 18-bit | yes | 4 D-SUB or 8 LEMO 0B |
TRION-1820-MULTI |
|
Datasheet | 4 | 2 MS/s | 24-bit >2 MS/s: 18-bit | yes | 4 D-SUB |
TRION-2402-MULTI |
|
Datasheet | 4 or 8 | 200 kS/s | 24-bit | yes | 4 D-SUB or 8 LEMO 0B |
TRION3-1850-MULTI-AOUT-8 |
 |
Datasheet | IN: 8 OUT: 8 |
IN: 5 MS/s OUT: 2.5 MS/s |
IN: 24-bit OUT: 32-bit |
IN: ISO OUT: ISO |
IN: LEMO 0B OUT: D-SUB, BNC |
| TRION3-1820-MULTI-AOUT-8
|
|
Datasheet | IN: 8 OUT: 8 |
IN: 2 MS/s OUT: 2.5 MS/s |
IN: 24-bit OUT: 32-bit |
IN: ISO OUT: ISO |
IN: LEMO 0B OUT: D-SUB, BNC |
| TRION3-AOUT-8
|
|
Datasheet | OUT: 8 | 2.5 MS/s | Up to 32-bit | yes | OUT: D-SUB, BNC |
Compatibility: The high-speed DEWE3 systems support both, TRION3 and TRION modules. The DEWE2 systems only support TRION modules.
Here you find the overview of our DAQ systems
10+ measurement modes for almost every sensor and application:
9 native modes:
- bridge
- voltage
- current
- IEPE
- resistance
- potentiometer
- temperature (RTD)
- counter and CAN
3 MSI compatibilities:
- charge input
- thermocouple input
- LVDT input
| INPUT TYPES | RANGES | SUPPORTED SENSORS |
Voltage  |
±2 mV to ±100 V freely programmable | – |
| IEPE® |
100 mV to ±10 V freely programmable | IEPE® sensors |
| Bridge |
1 to 1000 mV/V | 4-, 5-, 6-wire full bridge; 3-, 4-, 5-wire ½ bridge; 2-, 3-, 4-wire ¼ bridge; 120 / 350 / 1000 Ω |
| Resistance |
10 Ω to 30 kΩ | Potentiometer, resistance temperature detection: Pt100, Pt200, Pt300, Pt500, Pt2000 (2-, 3-, 4-wire) |
Current  |
±30 mA | 4 to 20 mA sensors; loop powered sensors |
| CAN |
– | CAN 2.0 |
| MSI |
MSI-BR-CH-x: 500 to 50000 pC MSI-BR-TH-x: various TC ranges MSI-BR-LVDT |
LVDT, RVDT, charge output and thermocouple sensors |
| Voltage input accuracy ≤10 V | DC 0.1 Hz to 10 kHz 10 kHz to 50 kHz 50 kHz to 100 kHz |
±0.02 % of reading, ±0.02 % of range ±20 μV ±0.02 % of reading, ± 0.02 % of range ±20 μV ±0.1 % of reading, ± 0.02 % of range ±20 μV ±0.5 % of reading, ± 0.02 % of range ±20 μV |
| Input impedance | Differential (100 MΩ or 1 MΩ), Single ended (50 MΩ) | |
| Input coupling | DC/AC (highpass filter 0.16 Hz to 100 Hz freely programmable) | |
| Spurious free SNR (10 V range) | 1 kS/s to 200 kS/s: 140 dB |
Isolated highspeed inputs
The TRION(3)-18xx-MULTI modules are faster than any other similar module on the market.
- Simultaneous sample rate of up to 5 MS/s
- Analog bandwidth of 2 MHz
- Continuous data streaming to application and disk
- Channel to channel, channel to ground, both isolated (350 V)
- For DEWE2 (2 MS/s) and DEWE3 (5 MS/s)
Onboard filtering and signal processing
To provide excellent signal to noise ratio and aliasing free data, the module is equipped with:
- Analog anti-aliasing filter
- Precise lowpass filter with Bessel and Butterworth characteristic up to 8th order with freely programmable cutoff frequency
- AC-coupling programmable (0.16 Hz to 100 Hz)
- Linearization of RTD and thermocouple sensors
Ultra-low noise and distortion
Analog circuit design and AD-conversion at a glance. Better performance than any other 24-bit highspeed measurement system.
- Outstanding dynamic range (140 dB)
- Highest accuracy also for AC
- Market leading number of effective bits
- Best solution for analysis of dynamic signals in mechanical structure analysis
- THD -108 dB at 1 kHz
Powerful excitation
Voltage and current controlled sensor excitation for almost every sensor type. There is enough power to supply sensors with high demand as well:
- 0 to 24 V with up to 100 mA (max. 0.5 W)
- 0.1 to 60 mA with up to 24 V (>20 mA: 10 V)
- Highest accuracy of 0.02 %
- No power sharing between individual inputs
