Standalone Signal conditioning

Our universal, isolated DAQP-STG amplifier and the DEWE-30-x chassis are the perfect combination for pure signal conditioning.

DAQP-STG Isolated universal amplifier

The isolated, single-channel DAQP-STG amplifier offers bandwidth up to 300 kHz and high isolation up to 1.8 kV_RMS. The RS-485 interface supports the easy configuration. The DAQP-STG amplifier offers a conditioned signal output of ±5 V.

• Channels: 1 isolated
• Bandwidth: 300 kHz
• Sensor Supply: 0-12 V, 0-20 mA
• Voltage range: ±10 V
• Voltage input: ±500 μV to ±10 V (up to ±200 V only with MSI-BR-V-200)
• Bridge, strain gauge: ±0.1 to ±1000 mV/V (@ 5 V_DC excitation)
• Piezoresistive bridge: ±0.5 to ±10000 mV/mA (@ 1 mA excitation)
• RTD: Resistance Temperature Detector (Pt100 to Pt2000), 9 resistance ranges (8 to 4000 Ω)
• Resistance: 25 mΩ to 100 kΩ
• IEPE: Constant current powered sensors (accelerometers, microphones), 12 ranges from ±100 mV to 10 V, (requires MSI-BR-ACC)
• Thermocouple: Full range of TC type (requires MSI-BR-TH-x)
• Charge: Up to 50000 pC (requires MSI2-CH-x)
• Others: TEDS

Download DAQP-STG Datasheet

DAQP modules can be installed in a DEWE-30 chassis. They offer a conditioned signal output of optional ±5 V or ±10 V on BNC sockets or a multi-pin connector when DAQP dynamic isolation amplifiers are installed. The multi-pin connector can be configured to match any A/D boards connector so that a 1:1 connection of the analog signals by a high quality cable is possible. They can be used as channel expansion or as front-end for existing recorders and loggers.

DEWE-30 CHASSIS	PDF	SLOTS	CONDITIONED OUTPUT	AC	DC	19” MOUNTING	WEIGHT	SIZE (W x D x H)
DEWE-30-16			16	16	AC	–	Yes	Typ. 4 kg (9 lb.)	435 x 245 x 133 mm (17.1 x 9.6 x 5.2 in.)
DEWE-30-32			32	32	AC	–	Yes	Typ. 7 kg (15 lb.)	435 x 245 x 223 mm (17.1 x 9.6 x 8.8 in.)

The DAQP modules in the table below are not recommended for new design. But you will surely find a worthy replacement with our TRION modules and the DEWE3 instrument series.