Single-channel Modules for Dynamic Signals

: DAQP-HV

DAQ modules are single-channel plug-in units for dynamic signals. They are available for just about every popular sensor and input type in use today. These include voltage from mV to kV, strain gages, accelerometers, thermocouples and RTD's (see all the PAD/EPAD/CPAD series for static and quasi-static voltage and temperature measurements), potentiometric, and current sensors.

DAQ series modules have conditioned +/-5V outputs, perfect for the inputs of any A/D card. You can also use DAQ modules in front of any data acquisition system or recorder.

DAQ General Information

DAQ modules are single-channel plug-in units for dynamic signals. The modules shown on this page are available in several versions according to variable such as the isolation, range, or bandwidth (see the table for details). Some are offered with a selection of input connector type, which will be shown below the table. In general, DAQ modules are:

Single input channel modules
Medium/High bandwidth - for dynamic signals
Isolated (depending on the module)
Analog signal output (±5 V) - perfect for A/D card connection
Modular - that means easy to change in the field with just 2 screws
Plug into DEWETRON systems with built-in slots or...
Plug into DEWE-30 series signal conditioning racks or...
Plug into DEWE-50 series ADC signal conditioning racks

DAQ Module Types

Our DAQ series modules are divided into several logical groups according to their application and input types. Please use the buttons above to look further into any of these groups to learn more about them!

HIGH VOLTAGE	MED VOLTAGE AND CURRENT
BRIDGE/STRAIN GAGE	LVDT / AC CARRIER
ACCELS/MICS (dynamic)	ACCELS (static)
OHMIC & POT (USING BRIDGE MODULES)	FREQUENCY TO VOLTAGE
TEMPERATURE (thermocouple and RTD)	SPECIAL PURPOSE (1:1 input modules, output modules.