The Measurable difference.

Dewetron blog news

the measurable difference

Oxygen 3.5 Available now!

04/04/2019 | OXYGEN Software
A package of the new OXYGEN 3.5. software which enables synchronous data acquisition

We released our new OXYGEN Software Version 3.5 with many new features like synchronous Data Acquisition.
Update for FREE today* and check it out!

We are happy to announce that we again released a new version of our software OXYGEN – version 3.5. Therefore, we are want to present you new features and functions. We increased the range of applications which enables you to get your things done more easily. For instance, we want to show you our option for synchronous data acquisition tasks via a measurement cloud, our Bird’s Eye and many other improvements.

OXYGEN Net meets GPS/IRIG/PTP Synchronization for synchronous Data Acquisition

We finally moved on with the development of OXYGEN Net and unleashed the measurement system from its wires. Consequently, we now support the synchronization of several nodes, not only via our TRION-SYNC-BUS, but also via GPS/IRIG or PTP. In other words, we simplified synchronous data acquisition. This enables the use of OXYGEN in almost every use case, in which distributed, but simultaneous measurements are necessary. Whether mobile or wide distance application, with OXYGEN 3.5 nearly everything is possible with a maximum of comfort. Your success is just a few clicks away, no complicated settings or workarounds anymore.

This feature requires a separate license option. Therefore, if you have a license for OXYGEN Net, these new features are alreaedy included. If you don’t have these functionalities yet, get it touch with our team. We are happpy to tell you more about OXY-OPT-NET.

CAN-OUT for TRION

Good news for our OXYGEN users! This is probably the most desired feature in OXYGEN’s histroy. We finally complete our testbed interfaces with a new option – CAN-OUT. This enables you to send any measurement data cyclically via CAN to your host system. In other words, you can individually set any CAN message to be received or transmitted by the measurement device with its own frequency. Just load your CAN database, switch the desired messages to “Transmit” and assign OXYGEN channels with the usual Drag’n’Drop to the right CAN signals. Furthermore, the new feature allows you to increase the message cycle frequency to up to 100 Hz. Hence, you can get a new message every 10 ms. To improve the behavior, we also implemented a tuning parameter. This allows you to intentionally delay messages. As a result, you will meet your requirements according to speed and quality.

 

This feature requires a separate license. Get it touch with our team to learn more about OXY-OPT-CAN-OUT.

Power Analyzer – Additional Calculation Method

All users of our power analyzers appreciate the high precision of the gapless cycle-by-cycle calculation. However, sometimes good is not good enough. Therefore, we introduced the “Rolling Calculation” feature. This enables you to get voltage and current RMS as well as power values with a resolution of 1 ms. This method finds use within 50 or 60 Hz power grid systems. It helps to analyze fast transitions and power failures as required by some standards like 61400-21 or FGW-TR3. The calculation window is exactly the size of the actual fundamental cycle period. This is very important to get a stable reading even while frequency is changing. Since many other methods use fixed-window evaluation, our option provides a huge benefit.

See Oxygen Power Techref for more information.

This feature requires a separate license. Get it touch with our team and get your OXY-OPT-POWER-EXP.

Bird’s Eye – Arc Element

Another improvement impacts our Bird’s Eye option. The Bird’s Eye extension in OXYGEN is now capable of designing not only linear paths but also segments of a circle. As a result, you can use these track elements for constant radius curves. This is particularly important for performing special tests for headlight evaluation. The tests are usually done with special shaped curves in two different radii and directions.

This feature requires a separate License Option. If you already have a license for Bird’s Eye, these new features are included. If not, get it touch with our team and learn more about OXY-OPT-BIRD’S EYE.

New Hardware Support

  • Support of our brand new TRION-X-CB-16-D expansion for the TRION-1600/1802-dLV series. It also includes the detection of the MSI-Adapter, an additional feature.
  • Integration of our new masterpiece, the TRION3-1850-MULTI-8 and its siblings. With this board, new features got introduced, like the user selectable highpass-filter, freely adjustable bridge shunt resistor and a lead wire compensation for quarter bridge applications.

Additional Improvements

  • Simply start from scratch: Reset to defaults button for a fresh configuration of your setup.
  • Autostart measurement – Automatically start the measurement after loading a measurement setup. This is particularrly useful in the case of a power failure during measurement. With this feature, you can easility continue afterwards.
  • CAN timestamp method is now selectable: Adjust the timebase to the analog samplingrate or choose the highest possible resolution.
  • Faster reading with the new dmdReader: We changed the method of reading asynchronous data (like CAN) to be much more performant.

We hope, you like our new features! If you never want to miss any update, follow us on LinkedIn.
If there are any questions left, contact us. We aim to provide you with the best solution for you business.

Are you curious about our Features for synchronous Data Acquisition?

Get Oxygen 3.5 now!

* update is free for users with license option Oxygen 3.x

Recent Posts

Contact us Contact us

Do you have a question?

Kontakt-Formular