CAPS - ACC (Adaptive Cruise Control)

Ready-to-go measurement solution

ACC senses the velocity of the preceding vehicle and adapts the own velocity accordingly. To test ACC, different drive maneuvers with two vehicles must be performed. CAPS-ACC is the only available test tool that allows synchronized measurement from both vehicles.

Key features

• Synchronized measurement from 2 vehicles (master and slave vehicle)
  • Universal and multifunctional measurement system for each vehicle
  • Synchronized measurement of analog (voltage, acceleration, strain, etc.), counter, CAN, GPS and video data
• High accurate combined GPS and Gyro measurement
  • ADMA from GeneSys for six degree of freedom motion analysis
  • High performance differential GPS position measurement
• Easy mounting, setup, alignment and calibration
  • Master manages the measurement and the configuration for both units
  • Master and slave synchronization via GPS clock
  • Online master slave data transfer by WLAN
  • Measurement data is redundantly stored on each unit and can be transferred to Master after the test
• Comparable and reproducible tests
  • Data such as vehicle distance, speed, heading is recorded fully synchronized together with CAN Bus and video data
  • Online checking of the measurement data quality with visualization of the relative position and the heading of both vehicles
  • Automated report generation for predefined maneuvers

Optional:

• Driving maneuver catalog with 9 pre-defined driving situations and user defined extensions
  • (Steady State Distance, Convoy Approaching,Acceleration in Convoy, Deceleration in Convoy, Overtaking from Steady State, Lane Change Obstacle Vehicle, Double Lane Change, Overtaking after Approach, Stop and Go)
• Driver guidance with automated start of measurement on defined conditions

DEWETRON systems are investments in the future; they can grow with your requirements and replace several application-specific solutions on the test track, on test benches, or in the lab.

Please check out our pre-configured standard models for combined active and passive safety testing. Standard models meet approximately 80 % of all application requirements, are cost optimized and shipped faster.